new OMTech Pronto U1 90W-155W CO2 Laser Engraver and Cutter with Built-in Water Chiller
Desktop Diode Laser Engravers

OMTech Pronto U1 90W-155W CO2 Laser Engraver and Cutter with Built-in Water Chiller

The bottom line: Prices are stable. If price is a concern, check the Creality Falcon 5W CR-Laser Engraver and Cutter instead.

The OMTech Pronto U1 is a desktop-to-prosumer CO2 laser engraver and cutter available in roughly 90W to 155W configurations, with an integrated water chiller built into the chassis so no separate chiller is needed. It cuts and engraves wood, acrylic, leather, glass, fabric, and other non-metal materials and is aimed at small businesses, makers, and signmakers who want a more compact, all-in-one CO2 setup. Note: it is a CO2 tube laser, not a diode laser, despite the category it was listed under.

$5239.99 at OMTech Store · checked Nov 13
All-time low: $5239.99Last tracked price · Verify on Amazon
Buy on Amazon #ad

Affiliate link — we may earn a commission.

Released: 2024Power: 90W to 155W CO2 tube (configuration dependent)Work Area: Varies by configuration (large-format desktop/prosumer bed); verify on OMTech's product pageSoftware: LightBurn-compatible (typically sold separately); bundled controller software variesConnectivity: USB and Ethernet (typical for this controller class; verify on listing)Laser Type: CO2 glass tube laser (10.6 µm)

Pros & cons

What we like

  • Built-in water chiller removes the need for a separate chiller, plumbing, and extra desk or floor space
  • High-wattage CO2 tube cuts thick wood and acrylic much faster and cleaner than diode lasers
  • Fully enclosed design with interlocks and safety features suited to shop or home-business use
  • Large work area relative to its footprint, good for production work and signage
  • Typically priced well below comparable Glowforge Pro/Aura-class or Boss/Thunder machines, with strong CO2 power per dollar

What could be better

  • Not a diode laser: CO2 tubes are consumable and eventually need replacement, adding long-term cost
  • Heavy and bulky, so it needs a dedicated bench or floor space plus external ventilation and an exhaust fan
  • Software (LightBurn or similar) is typically sold separately or runs through less-polished bundled tools, and the learning curve is steeper than beginner diode machines
  • Customer support and quality control on OMTech machines are inconsistent across reviews, with some reports of shipping damage, alignment issues, and slow warranty resolution

Key features

90W-155W CO2 laser tube options
Integrated built-in water chiller
Fully enclosed chassis with safety interlocks
Autofocus/adjustable-height bed (varies by configuration)
Large work area for production cutting and engraving
Compatible with LightBurn-supported controllers and standard laser workflows

Who is this for?

Best for

Small businesses, signmakers, Etsy sellers, and serious hobbyists who want production-level CO2 cutting power with a simpler all-in-one setup that includes the chiller. Good for those cutting thicker acrylic and wood who have the space and ventilation.

Not ideal for

Beginners wanting a plug-and-play, portable machine, or users who need to engrave or cut bare metal. Also not ideal for apartments or small spaces without a way to vent fumes and handle a heavy machine.

How it scores

Best for Metal
82
Best Under $1K
80
Safety
78
Software Compatibility
72
Best for Business
68
Best for Beginners
62

Price history (estimated)

Specifications

Power 90W to 155W CO2 tube (configuration dependent)
Work Area Varies by configuration (large-format desktop/prosumer bed); verify on OMTech's product page
Software LightBurn-compatible (typically sold separately); bundled controller software varies
Connectivity USB and Ethernet (typical for this controller class; verify on listing)
Laser Type CO2 glass tube laser (10.6 µm)
Speed Up to several hundred mm/s engraving (configuration dependent; verify on listing)
Weight Heavy, well over 100 lb due to integrated chiller and chassis (verify on listing)
Focus Motorized/adjustable Z-axis (autofocus on select configurations)
Enclosure Fully enclosed with safety interlocks and viewing window
Material Compatibility Wood, plywood, acrylic, leather, paper, cardboard, fabric, rubber, glass and stone (engraving); not suitable for cutting bare metals

Compatibility

iOS Not Supported
Android Not Supported
Companion App None (desktop software, LightBurn recommended)

Operated via desktop software on Windows (and macOS/Linux with LightBurn). No dedicated mobile app.

Featured in our guides

$5239.99 Amazon
Buy on Amazon